ManageEngine® 密码管理工具
Password Manager Pro 安装包下载

最新的PMP版本是7.5(内部版本7501)。如果使用的是早期版本,则需要应用upgradepack。如何找到我的内部版本?

下载升级包 | 升级包说明

From 7500 to 7501 Upgrade pack 7500 to 7501
From 7100/7101/7102/7103/7104/7105 to 7500 Upgrade pack 7100/7101/7102/7103/7104/7105 to 7500
From 7000/7001/7002/7003 to 7100 Upgrade pack 7000/7001/7002/7003 to 7100
Before applying this upgradepack, follow these instructions.
From 6900, 6901, 6902, 6903, 6904 to 7000 Upgrade pack 6900/ 6901/ 6902/ 6903/ 6904 to 7000
From 6800/6801/6802/6803 to 6900 Upgrade pack 6800/6801/6802/6803 to 6900
From 6700/6701/6800/6801 to 6802 Upgrade pack 6700/6701/6800/6801 to 6802
From 6600 to 6700 Upgrade pack 6600 to 6700
From 6500/6501/6502/6503/6504/6505 to 6600 Upgrade pack 6500/6501/6502/6503/6504/6505 to 6600
From 6404 to 6500 Upgrade pack 6404 to 6500
From 6400/6401/6402/6403 to 6404 Upgrade pack 6400/6401/6402/6403 to 6404
From 6303 and earlier versions Contact Support

应用升级包的说明(步骤仅适用于以MySQL或PostgreSQL作为后端数据库的PMP。对于MS SQL server,请参阅 下面的下一节)

  • In Windows, right-click the PMP tray icon and then click "Exit"
  • Shutdown both Password Manager Pro primary and secondary services, if running. Check if mysql / postgres process is running. If so, terminate that process
  • IMPORTANT: Take a copy of the entire Password Manager Pro installation folder before applying the upgrade pack and keep it in some other location. If something goes wrong with the PMP upgrade, you can rely on the copy. All your settings will remain intact.
  • The upgrade Pack is to be applied through a tool named UpdateManager bundled with PasswordManager Pro. Navigate to <PMP_Installation_Folder>/bin directory and execute UpdateManager.bat (in Windows) or UpdateManager.sh (in Linux) to start the Update Manager.
  • If you are applying multiple upgrade packs one-by-one, exit the Update Manager tool after applying one upgrade pack and make sure that the database process is not running. Then proceed with running the Update Manager tool to apply the next upgrade pack and so on
  • Click Browse and select .ppm file that you downloaded. Click Install to install the upgrade pack. Wait until the upgrade pack is fully installed. [Normally, it takes a few minutes for PPM installation]
  • Click Close and then click Exit to exit the Update Manager tool. If you are applying more than one upgradepack, apply them one-by-one and follow this step after applying each upgradepack
  • After applying the upgrade pack, check if database process is running. If it is running, terminate that process
  • Start the PasswordManager Pro server / service
  • Once you upgrade to the latest version, the High Availability set up has to be reconfigured again. The old HA set up will not work. In addition, the existing secondary server has to be uninstalled and a new secondary server has to be installed. You may download a fresh, full build and install it as SECONDARY.

If you need any assistance or clarifications, please contact passwordmanagerpro-support@manageengine.com.

应用升级包(MS SQL server作为后端数据库)的说明

Prerequisite

  1. In Windows, right-click the PMP tray icon and then click "Exit"
  2. Shutdown both Password Manager Pro primary and secondary services, if running
  3. IMPORTANT: Take a copy of the entire Password Manager Pro installation folder before applying the upgrade pack and keep it in some other location. If something goes wrong with the PMP upgrade, you can rely on the copy. All your settings will remain intact. Additionally, take a backup of the PMP database.
  4. If you have configured High Availability, login to MS SQL Server management studio and delete the following files/folders as explained in the screenshots below: (If High Availability not configured, skip this step)

If you have configured High Availability, before applying the upgradepack, PMP requires that the 'subscriptions' and 'publications' related to PMP replication data be deleted AND 'publishing and distribution' be disabled. To do these, carry out the steps below:

  • Deleting Subscription

    First, navigate to Replication >> Local Publications >> <Name of PMP database:PMP-HA>. You will see a file with <PMP server name>. <Name of PMP database>. Right click the file and press 'Delete' in the menu.

  • 密码管理工具下载 - ManageEngine Password Manager Pro

  • Deleting Publication

    Then, navigate to Replication >> Local Publications >> <Name of PMP database:PMP-HA>. Right click the folder <Name of PMP database:PMP-HA> and press 'Delete' in the menu.
  • 密码管理软件安装包下载 - ManageEngine Password Manager ProL
  • Disabling Publishing & Distribution

    Then, right click the 'Replication' folder and click the option "Disable Publishing and Distribution"

 

HA-MSSQL

 

Applying Upgradepack

  1. The upgrade Pack is to be applied through a tool named UpdateManager bundled with PasswordManager Pro. Navigate to <PMP_Installation_Folder>/bin directory and execute UpdateManager.bat (in Windows) or sh UpdateManager.sh (in Linux) to start the Update Manager.
  2. When configuring the MS SQL server as the backend database for PMP, if you have chosen the option to use 'Windows Authentication', you need to start the command prompt using the service account with which the PMP service has been configured to connect to the SQL server (that means, instead of running as administrator, you need to run as the service account). To check which service account has been configured, navigate to <PMP-Installation-Folder>/conf directory and open the file database_params.conf. Search for the word 'password' in this file. If you find this entry, it means that you are just running as 'administrator' and you have to start the command prompt as administrator. In case, you do find 'password' at all, search for 'username'. The value against this provides you the name of the service account.
  3. If you are applying multiple upgrade packs one-by-one, exit the Update Manager tool after applying one upgrade pack and make sure that the database process is not running. Then proceed with running the Update Manager tool to apply the next upgrade pack and so on
  4. Click Browse and select .ppm file that you downloaded. Click Install to install the upgrade pack. Wait until the upgrade pack is fully installed. [Normally, it takes a few minutes for PPM installation]
  5. Click Close and then click Exit to exit the Update Manager tool. If you are applying more than one upgradepack, apply them one-by-one and follow this step after applying each upgradepack
  6. After applying the upgrade pack, check if database process is running. If it is running, terminate that process
  7. Start the PasswordManager Pro server / service
  8. Once you upgrade to the latest version, the High Availability set up has to be reconfigured again. The old HA set up will not work. In addition, the existing secondary server has to be uninstalled and a new secondary server has to be installed. You may download a fresh, full build and install it as SECONDARY.

If you need any assistance or clarifications, please contact passwordmanagerpro-support@manageengine.com.

Instructions to upgrade JRE 7(Steps applicable when upgrading from builds 7000 and later)

Latest version of PMP runs with JRE v7u51. So, before proceeding with this upgrade, you need to download JRE and follow the instructions below. These steps are applicable only when upgrading from builds 7000 and later.

If you have installed PMP in Windows

  1. Ensure that PMP server is not running. In case, PMP is running as a service, shutdown that too. Also, check if mysql / postgres process is running. If so, terminate that process.
  2. Navigate to <PMP Installation directory>. You will see a folder named jre. Rename it as jre6
  3. Download the jre_windows_7u51.zip, copy the zip and paste it directly under <PMP Installation directory>
  4. Unzip the jre_windows_7u51.zip. This will create a folder named jre under <PMP installation directory>
  5. Now, navigate to the old jre6 (the one you renamed in step 2) available under <PMP-Installation-Directory>/jre6/lib/security/ folder. You will find a file named cacerts. Copy that file.
  6. Now, navigate to the new jre available under <PMP-Installation-Directory>/jre/lib/security/ and paste the cacerts you copied in the previous step.
  7. Now, run UpdateManager.bat and proceed with the upgrade

If you have installed PMP in Linux

  1. Ensure that PMP server is not running. Also, check if mysql / postgres process is running. If so, terminate that process.
  2. Navigate to <PMP Installation directory>. You will see a folder named jre. Rename it as jre6
  3. Download the jre_linux_7u51.zip, copy the zip and paste it directly under <PMP Installation directory>
  4. Unzip the jre_linux_7u51.zip. This will create a folder named jre under <PMP installation directory>
  5. Now, navigate to the old jre6 (the one you renamed in step 2) available under <PMP-Installation-Directory>/jre6/lib/security/ folder. You will find a file named cacerts. Copy that file.
  6. Now, navigate to the new jre available under <PMP-Installation-Directory>/jre/lib/security/ and paste the cacerts you copied in the previous step.
  7. Now, run UpdateManager.sh and proceed with the upgrade

如何找出我的内部版本号?

登录到PasswordManager Pro web界面,然后单击顶部窗格中的“关于”链接。您将在版本号下面找到内部版本号。这是当前安装的PasswordManager Pro的内部版本号。

他们正在使用Password Manager Pro安全管理企业密码